Product Description

CX-948 = Urethane Glue

For every rubberized safety surfacing, flooring and paver installation challenge there's the CX-948 solution. It is everything you need for the interlocking joints and product-to-sub base installations formulated to protect your safety surfacing, flooring and paver investment for many years to come. The CX-948 is a light brown, one-component, high strength, high-solid, low-VOC polyurethane-based adhesive that is three (3) times stronger than conventional adhesives with a shelf life of one (1) year. Its patented technologically advanced formula produces a permanent overnight bond to almost any substrate.



VOC Compliant

Environmentally Friendly

Low Odor

Replaces solvent based Adhesives for use indoors and out

Strong and Versatile

Permanently bonds together almost anything interior and exterior

High Solids

Provides excellent coverage


Stronger than many substrates in joins together

Fast Curing

Provides permanent overnight bonding

Long open time

Offers flexibility in repositioning; User Friendly


Can be applied to frozen, frost-free items

Broad service temperature ranges

Suitable for use in hot and cold environments/climates


Improves worker safety

Eligible for USGBC = LEED Points/Credits

Suitable for use in all 50 states……..and internationally

AFG-01 Approved

Meets Industry Standard

Unity’s accessory items, as well as its knowledgeable customer service, are keys to our successful reputation in the industry as a single-source provider of this polyurethane-based adhesive for our products and services. We have grown by providing the best and safest glues for our interlocking joints through a series of advancements in design, giving you (the customer) the best bonding in a rubber tile/mat/block/paver.

Used in all types of climates, the high solids provide excellent coverage over the life of your safety surfacing, flooring and paver investment. There is no shrinking to create loose bonds, or cracking, that is common among other competing rubber tiles/mats/blocks/pavers on the market today. The CX-948 is AFG-01, FHA Bulletin UM-60, ASTM D 3498 approved to meet industry standards.

The CX-948urethane glue is used to adhere our product down to the solid sub-straight (DO NOT ROOFTOP MEMBRANES) and to each other (weather it is at the factory edges, at the interlocking joints, or on the “lead-in” cut). Our urethane glue reduces the need for additional materials, such as: pins, clips, fasteners, pegs and/or support blocks that may never be installed by the installation crew, contractor or end-users.

We advise against installing this glue product to roof membranes without consulting with you engineer, architect and local building code requirements first. Gluing our products down to a rooftop membrane will most likely void your warranty/guaranty. However, we do recommend that glue be applied to both the inside of the interlocking joint and on top (outside edge) for a free-flowing adhesion throughout the interlocking system, including the back wall, providing not one or two, but FIVE layers of protection that is unmatched in the industry today. Don't be bashful with the glue, as we are the ONLY manufacuturing company to provide a drainage port for any access glue to ozze down and out...........away from the top finish of our products giving it a clean, first-class look after it is installed.

Surfacing area must be structurally sound, dry, clean and free of dirt, moisture, loose particles, oils, grease, wet tar, paint, wax, rust, waterproofing or curing and parting compounds, membrane materials or other substances that may affect proper adhesion. During the installation process, it is important to maintain the cleanliness of the area.


It is important to store containers in a warm, dry area away from direct sunlight. Storing in elevated temperatures will reduce shelf life. In cool or cold weather; store containers at room temperatures for at least twenty-four (24) hours before using.