"Soft-Land" (tiles-mats-blocks)


Soft-Land
is "Unity's" 3" (inch), 3 1/4", 3 1/2" and 3 3/4" thick rubberized safety surfacing, flooring and paver products that are made from 100% recycled tires and rubber granules. These double tiles-mats-blocks with their double interlocking system and bolt-down capabilities are expected to outlast anyone! They are used to sit, walk, travel, play on or simply enjoy no matter what the occasion is. This product is found mostly on rooftops, playgrounds, daycare centers, recreational areas, pools & patios, walkways, marina & docks, schools, rock climbing walls and in water and amusement parks where an eight (8), nine (9), ten (10), eleven (11) and twelve (12) foot drop heights are needed. It is also found where a soft flooring, surface or landing area is needed, for example: an assisted living complex. Soft-Land has the highest drop height rating in the industry for a single layer at only 3 ½” thick that no one in the industry can touch. They are also used in many other applications that are found indoors and outdoor as well including acoustical areas and rooftops for noise reduction. 

SAFETY - QUALITY - DURABILITY is what Unity’s products are all about. They are easy to clean and safe to use resulting in very low maintenance costs to the end users. It does not displace during usage by anyone thus creating consistent shock absorbency all year round. The low life cycle costs makes for very good footing thus preventing leg fatigue. Soft-Land does not harbor foreign objects, such as glass, commonly found in loose filled materials. There are no retaining edges needed and all of "Unity's" rubberized safety surfacing, flooring and paver products are accessible to the handicapped. They are also water permeable, easy to install and are fully warranted which makes for a superior product that no one can match.  

Not only are they resilient, they can be installed over most existing surfaces and rooftops, but they are also independently laboratory tested exceeding ASTM (American Standard for Testing Material), CPSC (Consumer Product Safety Commission) and ADA (Americans with Disabilities Act) safety guidelines and LEED certified for:

Fall Safety Heights, Skid Resistance, Fire Retardant, Weathering (Aging), Accessibility, Thermal Conductivity Tests

Loose filled materials such as, sand, pea gravel, mulch, wood-chips, bark, fiber or loose rubber are highly dependent on maintenance. If not constantly replenished and raked level by grounds keepers, it can often fall short of providing safety to the area, thus requiring more deliveries of loosed filled materials to be delivered regularly costing even more money each and every year. Loose filled products are home to cats and dogs for their liter boxes. Bee's, hornets, wasp's and other insects like to use these same surfaces as their new homes. Many people dislike the fact that loose filled materials will build up in someone's sneaker or shoe and is take into a clean home, building, school, etc.

It should also be noted that a fall onto these loose filled materials could also penetrate someone's protruding cut, which creates a burning or stinging sensation. It is also very dangerous to exposed skin causing a child or adult to receive splinters upon falling or tripping to the surface below. Serious eye damage can be created by light airborne particles flying in the air on a windy day or after a fall to the ground below and even from someone throwing it. This is why architects, engineers, agencies, municipalities and day care providers across the globe are planning future projects using our Soft-Land products as the newest alternative to flooring and surfacing.

Installation of this product is placed in the intermediate category. Adhesive should be applied to the base &/ or interlocks (bolt-down capabilities are available) for extra strength and security. A utility knife or jig saw is used for cutting, a straight edge to make your cuts accurately, a straight line and tape measure is also needed. A trowel or corking gun is needed for gluing purposes. A complete installation guide/manual can be found here on our Internet website.

  Thickness'       Fall Safety Height       Weight Per Unit       Weight Per Foot

   3" (inch)                   8' (foot)                       50.40 lbs.                       7.5 lbs.

 3.25" (inch)                9' (foot)                       53.76 lbs.                         8 lbs.

 3.5" (inch)                11' (foot)                       57.12 lbs.                       8.5 lbs.

3.75" (inch)               12' (foot)                       60.48 lbs.                        9 lbs.

The size of the “Soft-Land” products is 22" (inches) by 44" (inches) with interlocks.

 
Click HERE to download a PDF version of our “Soft-Land” series for your review and consideration.

 
Copyright © 1987-2006, Unity Creations, LTD. All Rights Reserved. Specifications subject to change without notice.
Should you have any questions or concerns, please feel free to contact us directly at: 1-877-41-UNITY
   
[ Home ] [ Site Map ] [ Unity Surfacing Printable Flyer ][ Login ]