CX-948 Glue Test

Product Information:

For every rubberized safety surfacing, flooring and paver challenge there's our CX-948 solution... everything you need to build, repair and protect your investment, even if it is not our tiles-mats-blocks you are using it for. Our CX-948 is used to adhere our product down to the solid sub-straight and to each other (weather it is at the factory edges or at the interlock). This reduces the needs for additional materials such as: pins, clips and fasteners that may never be installed by the contractor. Or may create future problems for customers later on.

Product Description:  Adhesive (one-part urethane glue)

MSDS ID #: 10681

TSCA Inventory: All components of this product are included, or are exempt from inclusion, in the EPA Toxic

      Substances Control Act (TSCA) Chemical Substance Inventory.

Canadian DSL: All components of this product are included, or are exempt from inclusion, in the Canadian

   Domestic Substance List (DSL).

Compliances: Meets or exceeds all requirements of the American Plywood Association Specifications AFG-01,

Adhesive for Gluing Plywood to Wood Framing.

FHA Bulletin UM-60

ASTM D-3498

Typical Properties

Testing Data:

Lap Shear

Adhesive strength chart

Note: Average data is from 10 Specimens. Wet lumber is from overnight soak. Foam tears apart at 37 psi (0.25 mpa). Test results are typical values obtained under laboratory conditions. Reasonable variations can be expected.

Curing:

The CX-948 forms a tenacious bond overnight. Firm set in 1 to 2 hours; Handle able up to 16 hours, and fully cures in 7 days. This is based on temperatures at 75 degrees F. (24 degrees C) and 50% relative humidity. Cure times vary with temperature, humidity, and the porosity of the materials joined.

Yield:

VOC Content:

45 G/L or 0.38 lbs/gal, less water and exempt solvents.

For a complete copy (set) of the actual test results, please contact "Unity" Surfacing Systems directly at: (1-877) 41-UNITY