For every rubberized safety surfacing, flooring and paver challenge there's our CX-948 solution... everything you need to build, repair and protect your investment, even if it is not our tiles-mats-blocks you are using it for. Our CX-948 is a light brown, one-component, high strength, high-solid, low-VOC polyurethane-based adhesive that is three (3) times stronger than conventional adhesives with a shelf life of one (1) year. Its patented technologically advanced formula produces a permanent overnight bond.
We are the premier provider of this solution for the building and construction industry. Our company's essential and flexible product offerings, as well as its knowledgeable customer service, are keys to its successful position as a single-source provider of this product. We have grown by building strong customer relationships, and through a series of mergers and acquisitions, giving the industry's best product offering, the CX-948.
This one-part urethane glue is environmentally friendly with no odor. It replaces solvent-based adhesives making this product safe to use indoors and out. It is strong and versatile, thus permanently bonding together to almost anything. The high solids provide excellent coverage. There is no shrinking to create loose bonds, or cracking, that is common among other products on the market today. The CX-948 is user friendly to long open times offering flexibility in repositioning. It is a nonfreezing product that can be applied to frozen, frost-free areas, which offers a broad service of temperature ranges suitable for use in hot and cold environments. It is nonflammable to improve worker safety. Our CX-948 is eligible for LEED points and is compliant to South Coast Bay Areas in all fifty (50) states. Don’t forget it is AFG-01, FHA Bulletin UM-60, ASTM D 3498 approved to meet industry standards.
Our CX-948 is used to adhere our product down to the solid sub-straight and to each other (weather it is at the factory edges or at the interlock). This reduces the needs for additional materials such as: pins, clips and fasteners that may never be installed by the contractor. It is recommended NOT to glue our products down to the rooftop, however, it IS recommended to glue just the interlocks together. Gluing our products down to a rooftop membrane will most likely void your warranty / guaranty unless otherwise instructed by your architect or engineer. Surfacing area must be structurally sound, dry, clean and free of dirt, moisture, loose particles, oils, grease, wet tar, paint, wax, rust, waterproofing or curing and parting compounds, membrane materials or other substances that may effect proper adhesion.
Keep in mind: you always want to store containers in a cool, dry area away from direct sunlight. Storing in elevated temperatures will reduce shelf life. In cool or cold weather; store containers at room temperatures for at least twenty-four (24) hours before using.
|
