Anchor (Bolt-Down)


The original "Fastening System"
for our rubberized safety surfacing, flooring and paver products in the tile-mat-block form, cuts and threads into concrete, brick, asphalt or hollow block. And is: "Building Code Approved" for use indoors and out.

tapcon2photo.jpg (13953 bytes)

Product Features

bullet

Fast installation...drill a hole....drive an anchor.

bullet

Packaged with one anchor-bolt "close tolerance" masonry drill bit per 100 anchors.  Also available in bulk packaging.

bullet

Available in 3/16" and 1/4" diameters and in lengths 1-1/4" - 6".

bullet

Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications.

bullet

No need to pre-spot holes....and no inserts are required.

bullet

Reversible and removable....can be installed close to an edge.

bullet

The minimum embedment requirement is 1" and the maximum embedment is 1-3/4"

 

Installation Tools

bullet

Condrive® 500 - Compact high speed installation tool designed for installation of anchor-bolt hex head and Phillips flat head anchors up to 3-3/4" long.  The 500 do not have the disengagement feature offered by the 1000.  The 500 package is disposable.

bullet

Condrive® 1000 - A multi-purpose tool designed for installation of anchor-bolt hex head and Phillips flat head anchors up to 3-3/4" long.  If driving hex washer head anchor-bolt, driver will automatically disengage.  The 1000 have a reusable plastic case.

bullet

Condrive® 2000 - A highly-automated, high speed, one-step tool designed specifically for repetitive installation of hex head anchor-bolt anchors of lengths up through 2-3/4".  If driving hex washer head anchor-bolt, driver will automatically disengage.  The 2000 have a reusable plastic case.

bullet

Buildex Condrive Tools are designed to specifically install anchor-bolt Anchors and to fit standard hammer drills.

The new "bolt-down" capabilities, as seen within the interlocks of our "Play-Land" and "Soft-Land" series products, are countersunk in order to allow for the interlocking system to be glued as well as snapped and hooked together. This "Anchor Bolt" system is designed for even more protection against vandalism, another feature that has been patented globally.

Copyright © 1987-2008, Unity Creations, LTD. All Rights Reserved. Specifications subject to change without notice.
 
Should you have any questions or concerns, please feel free to contact us directly at: 1-877-41-UNITY
 
[ Home ] [ Site Map ] [ Unity Surfacing Printable Flyer ]