|
Part #
PFH
|
Part #
HWH
|
Description
|
Drill Bit
(One bit included in each box of 100ct.)
|
Part #
|
Fixture Thickness
|
|
3169407
|
3139407
|
3/16 x 1-1/4"
|
5/32 x 3-1/2"
|
3095910
|
0 - 1/4"
|
|
3183407
|
3153407
|
1/4 x 1-1/4"
|
3/16 x 3-1/2"
|
3098910
|
0 - 1/4"
|
|
3171407
|
3141407
|
3/16 x 1-3/4"
|
5/32 x 3-1/2"
|
3095910
|
1/4 - 3/4"
|
|
3185407
|
3155407
|
1/4 x 1-3/4'
|
3/16 X 3-1/2"
|
3098910
|
1/4 - 3/4"
|
|
3173407
|
3143407
|
3/16 X 2-1/4"
|
5/32 X 4-1/2"
|
3096910
|
3/4" - 1-1/4"
|
|
3187407
|
3157407
|
1/4 X 2-1/4"
|
3/16 X 4-1/2"
|
3099910
|
3/4" - 1-1/4"
|
|
3175407
|
3145407
|
3/16 x 2-3/4"
|
5/323 x 4-1/2"
|
3096910
|
1-1/4" - 1-3/4"
|
|
3189407
|
3159407
|
1/4 x 2-3/4"
|
3/16" x 4-1/2"
|
3099910
|
1-1/4" - 1-3/4"
|
|
3177407
|
3147407
|
3/16 x 3-1/4"
|
5/32 x 5-1/2"
|
3097910
|
1-3/4" - 2-1/4"
|
|
3191407
|
3161407
|
1/4 x 3-1/4"
|
3/16 x 5-1/2"
|
3100910
|
1-3/4" - 2-1/4"
|
|
3179407
|
3149407
|
3/16 x 3-3/4"
|
5/32 x 5-1/2"
|
3097910
|
2-1/4" - 2-3/4"
|
|
3193407
|
3163407
|
1/4 x 3-3/4"
|
3/16 x 5-1/2"
|
3100910
|
2-1/4" - 2-3/4"
|
|
3181407
|
3151407
|
3/16 x 4"
|
5/32 x 5-1/2"
|
3097910
|
2-1/2" - 3"
|
|
3195407
|
3165407
|
1/4 x 4"
|
3/16 x 5-1/2"
|
3100910
|
2-1/2" - 3"
|
|
3197407
|
3167407
|
1/4 x 5"
|
3/16 x 6-1/2"
|
3102910
|
3-1/4" - 4"
|
|
3203407
|
3205407
|
1/4 x 6"
|
3/16 x 7-1/2"
|
3206910
|
4-1/4" - 5"
|
|
3379910
|
-
|
Condrive
500
|
|
|
For 3/16 and 1/4 diameter, Hex and Flat Heads, lengths
up to 3-3/4"
|
|
3103910
|
-
|
Condrive 1000
|
|
|
For 3/16 and 1/4 diameter, Hex and Flat Heads, lengths
up to 3-3/4"
|
|
3119910
|
-
|
Condrive 2000
|
|
|
For 3/16 and 1/4 diameter, Hex Head, lengths up to
2-3/4"
|
Performance Data
|
Pullout in Concrete (3145 PSI, cured
40 days) (lbs)
Test Number CH3932/ Pittsburgh Testing Laboratories
|
|
Anchor Diameter
|
1" Embedment
|
1-1/4" Embedment
|
1-1/2" Embedment
|
1-3/4" Embedment
|
|
3/16" Dia.
|
341 lbs.
|
581 lbs.
|
863 lbs.
|
1059 lbs.
|
|
1/4" Dia.
|
718 lbs.
|
1138 lbs.
|
1537 lbs.
|
1860 lbs.
|
|
Pullout in Hollow Block
Test Number CH3748/ Pittsburgh Testing Laboratories
|
|
Anchor Diameter
|
1" Embedment
|
1-1/4" Embedment
|
1-1/2" Embedment
|
1-3/4" Embedment
|
|
3/16" Dia.
|
209 lbs.
|
357 lbs.
|
468 lbs.
|
547 lbs.
|
|
1/4" Dia.
|
406 lbs.
|
615 lbs.
|
851 lbs.
|
984 lbs.
|
|
Shear Strength
Test Number CH3932/ Pittsburgh Testing Laboratories
|
|
Anchor Diameter
|
Anchor Embedment
|
(3145 PSI) Hard Rock Concrete
|
Lightweight Hollow Block
|
|
3/16" Dia.
|
1-1/4"
|
852 lbs.
|
731 lbs.
|
|
1/4" Dia.
|
1-1/4"
|
1604 lbs.
|
1058 lbs.
|
|
Mechanical Properties
Engineering Report # 619/ITW Buildex
|
|
Anchor Diameter
|
Tensile Strength (PSI)
|
Yield Strength (PSI)
|
|
3/16" Dia.
|
170,000
|
150,000
|
|
1/4" Dia.
|
170,000
|
150,000.
|
Condrive 1000 ( 3103910) Spare Parts:
|
Item No.
|
Description of Parts for Condrive 1000
|
Part No.
|
|
1
|
#2 Phillips Bit for 3/16" Dia Tapcon
|
3110910
|
|
2
|
#3 Phillips Bit for 1/4" Dia Tapcon
|
3111910
|
|
3
|
1/4" Socket for 3/16" Dia Tapcon
|
3108910
|
|
4
|
1/8" Ball Bearing
|
3121910
|
|
5
|
1/8" Hex Key
|
3122910
|
|
6
|
5/16" Socket for 1/4" Dia Tapcon
|
3109910
|
|
7
|
5/32" Ball Bearing
|
3107910
|
|
8
|
Black Band
|
3106910
|
|
9
|
Drill Adapter
|
3104910
|
|
10
|
Phillips Socket
|
3112910
|
|
11
|
Set Screw (2)
|
3120910
|
|
12
|
Sleeve
|
3105910
|
Condrive 2000 ( 3119910) Spare Parts:
|
Item No.
|
Description of Parts for Condrive 2000
|
Part No.
|
|
1
|
1/4" Hex Key
|
3281910
|
|
2
|
1/4" Socket for 3/16" Dia Tapcon
|
3278910
|
|
3
|
5/16" Hex Key for 1/4" Dia. Tapcon
|
3286910
|
|
4
|
1/8" Hex Key
|
3122910
|
|
5
|
Tool Body with 5/16" Socket
|
3362910
|
|
6
|
Plastic Sleeve
|
3279910
|
|
7
|
Set Screw
|
3120910
|
|
8
|
5/32" Ball Bearing
|
3107910
|
|
9
|
Black Band
|
3283910
|
|
10
|
5/16" Driver Nose Piece
|
3280910
|
ANCHOR BOLTS MUST BE INSTALLED
USING A BULLDEX SYSTEM COMPONENTS
Installation Guide (Condrive 500)
Guidelines
1.) Place drill
adapter into chuck of standard hammer drill. Place drill bit in drill
adapter and tighten set screw. Drill hole a minimum of ¼” deeper than
Anchor Bolt is to be embedded.
2.) Philips
head may be installed using either side of sleeve. To install a ¼” diameter
Hex Washer Head Anchor Bolt, use large opening side of sleeve. To install
a 3/16” diameter Hex Washer Head Anchor Bolt, use small opening side
of sleeve. Slide opposite side of sleeve over drill bit and snap onto
drill bit adapter. NOTE: If driving Hex Washer Head Anchor Bolt, driver
will automatically disengage. If driving Philips Head Anchor Bolt, care
must be taken to ensure anchor is not overdriven.
3.) Loosen
set screw on side of drill adapter with 1/8” Hex Key. Do not remove completely.
Replace old drill bit with new one. Align flat side with set screw and
tighten screw. Do not over tighten.
Installation Guide (Condrive 1000)
Guidelines
1.) Place correct
drill bit into adapter and drill hole ¼” deeper than depth
of embedded.
2.) Slide Condrive
Installation Tool sleeve over drill bit. Snap hex head or Philips Socket
in place.
3.) Insert
anchor in socket, position fixture to be fastened, begin to drive Anchor
Bolt into pre-drilled hole (asphalt / blacktop sub-bases would not need
pre-drilling, only concrete / cement does).
4.) The anchor
is fully set when the nosepiece of the Condrive Tool automatically disengages
from the socket and fixture is secured in place.
